Do it yourself
Frequently asked questions about cars and motorcycles
Today, learn how to reset the service light related to the oil change or service on a Vespa GTS 125. To reset the light after changing the oil, turn on the instrument panel and deactivate the IR mode by pressing the right button on the handlebar for 3 to 5 seconds. Then, press the left button to enter the service reset mode. Keep the button pressed for 8 to 10 seconds to complete the reset. If the reset fails, visit a workshop to check the oil sensor or the control unit.

Posted on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Vespa Gts 125 The Service light that is shown on the instrument panel of the Piaggio Vespa GTS 125 can be completely deleted by turning on the instrument panel, tu…
Vespa Gts 125 In this video we see how the ignition of the wrench-shaped light on the instrument panel of the Piaggio Vespa Gts 125 reminds us that we are approach…
Vespa Gts 125 Below we will see the instructions that will allow us to adjust the stiffness of the rear suspension of the Piaggio Vespa GTS 125 scooter, but also o…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos