Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Old Model Vespa Can Be Started by Pushing

Model: Piaggio Vespa 125 Primavera
Part: Battery

Video tutorial

If you have an old model Piaggio Vespa and the battery is flat, be aware that on the older models, specifically those from the '70s and '80s, there wasn't even a battery. In fact, Vespas from that era used a "flywheel magneto" ignition system.

This system generates electricity autonomously when the engine runs, without needing a battery, as the magnet creates current for the spark plug during engine rotation, sufficient to produce the spark needed for starting. Vespas were started using a pedal to turn the engine.

In case of necessity, as shown by the YouTuber, simply engage second gear, run, and hop on when you feel the engine start. Wasn't that fantastic?


Posted on 10 March 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Piaggio Vespa 125 Primavera?
How do you replace the exhaust pipe of the Piaggio Vespa 125 Primavera?
Vespa 125 Primavera To replace the exhaust pipe of the Piaggio Vespa 125 Primavera, you need to loosen the screws that secure the exhaust terminal to its housing on the …
How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
Vespa 125 Primavera Good morning, today’s guide aims to replace the spark plug on your Piaggio Vespa Primavera 125. Start by removing the side panels of the scooter. Nex…
How to remove the handlebar from the Piaggio Vespa 125 Primavera?
How to remove the handlebar from the Piaggio Vespa 125 Primavera?
Vespa 125 Primavera To remove the handlebar from the Piaggio Vespa 125 Primavera, you need to loosen the two screws that secure the front headlight to its housing, allow…

How to Change the Engine Oil in the Kawasaki Ninja 300?

In this tutorial, see how to change the engine oil in the Kawasaki Ninja 300, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down sufficiently, then remove the lower fairing by unscrewing all the relevant fixing screws. Next, position a container beneath the bike, unscrew the drain bolt with a 17mm spanner, and allow all the oil in the system to drain out. At this point, replace the filter, reassemble everything, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos