Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on Piaggio Liberty 150

Model: Piaggio Liberty
Part: Battery

Video tutorial

Lift the seat and notice the box located behind the under-seat area: the battery is inside it. Unscrew the two cross-head screws that secure it and remove the cover. Using the cross-head screwdriver, first unscrew the negative terminal related to the black cable (remember to always disconnect the negative terminal first).

Only then unscrew and disconnect the positive terminal related to the red cable. Done! At this point, you can extract the battery, although the space available to insert your fingers and grasp it is very limited.

Proceed in reverse for reassembly.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to replace the spark plug on a Piaggio Liberty 150 - 125
How to replace the spark plug on a Piaggio Liberty 150 - 125
Liberty In today's tutorial, we will see how to remove and replace the spark plug on the Piaggio Liberty 150 scooter, as well as the 125. First, place your s…
How to Change the Engine Oil of a Piaggio Liberty?
How to Change the Engine Oil of a Piaggio Liberty?
Liberty Hello, today’s goal is to change the engine oil of your Piaggio Liberty. Start by warming up the engine for 5 minutes to thin the oil and allow for q…
How to Install the Centre Stand on the Piaggio Liberty?
How to Install the Centre Stand on the Piaggio Liberty?
Liberty To install the centre stand on the Piaggio Liberty, use a lever to detach the trim panel on the left side of the footwell. Once this panel is removed…

How to Replace the Clutch Discs on a Kawasaki Z1000?

Here are the brief instructions for removing and replacing the clutch discs on a Kawasaki Z1000 motorcycle. First, place the motorcycle on a stand and begin draining the engine oil by unscrewing the oil drain bolt located under the engine; then unscrew the fixing screws of the clutch cover to access the clutch, as shown in the video. At this point, unscrew the screws of the clutch pack, removing all the discs; replace and install the new original clutch discs, alternating the cork discs with the metal ones!

Watch the video!


by ScegliAuto

More videos