Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Dipped Beam on a Piaggio Beverly 350

Model: Piaggio Beverly 350
Part: Headlight bulb

Video tutorial

For this model, we recommend using an H7 bulb rated at 12 Volts and 55 Watts. Unscrew the two screws located above the speedometer, then insert a small flat-head screwdriver or a plastic wedge into the gap and lever it out to unscrew the other two previously hidden screws.

At this point, you can also unscrew the two screws located beneath the headlight, one on the right and one on the left. Remove the headlight and place it on a workbench.

Remove the rear cover of the headlight and open the metal clip, then disconnect the connector and replace the bulb. Insert the new bulb and reassemble everything.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
Beverly 350 The main instructions in this guide will show you how to disassemble and replace the dipped beam bulb of the front headlight on the Piaggio Beverly 3…
Replacing the drive belt on the Piaggio Beverly 350
Replacing the drive belt on the Piaggio Beverly 350
Beverly 350 This guide provides instructions for removing and replacing the drive belt on the Piaggio Beverly 350 scooter in simple steps. First, place the scoot…
How to Replace the Exhaust on a Piaggio Beverly 350
How to Replace the Exhaust on a Piaggio Beverly 350
Beverly 350 This video provides instructions for removing and replacing the original exhaust with an Akrapovic on a Piaggio Beverly 350 scooter. First, place the…

How to Change the Engine Oil in the KTM Duke 390?

In this tutorial, you can see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the engine is cool enough, then remove the lower protective cover and place a container underneath the bike. Next, locate the drain bolt, unscrew it with an 18mm socket spanner, and let all the oil in the system drain out. At this point, you can open the filter housing, remove the old filter, and insert the replacement. Finally, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos