Do it yourself
| ||||
|
Model: Piaggio Beverly 300
Before starting, we will have to sit on the driver's seat of our Piaggio Beverly 300. Let's start by pressing and holding the "Mode" button located inside the right-hand light switch. While we hold it down, we will have to turn the key in the ignition switch, thus activating the instrument panel. By doing so, the wrench-shaped "Service" light will start flashing. We then proceed by continuing to hold down the "Mode" button until the "Service" light goes out. When we have completed this step, we will have to turn off the instrument cluster, and the reset will be completed.
Posted on 6 February 2024 by ScegliAuto
|
How to change the gearbox oil of the Piaggio Vespa Px 125 - Lml Star 125Today we will see, in this short and simple guide, how to replace the transmission oil of the Piaggio Vespa Px 125, but also of the Lml Star 125 2-stroke. First of all we put the central stand and we start to unscrew the oil vent bolt of the transmission, which we find on the right side casing; to do this we use a 10 mm socket wrench, letting the oil drain in a container for about ten minutes. At this point we unscrew the filler screw, in order to let the oil flow more quickly; then we finally top up, following the video to the end! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |