Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to reset the service light on a Piaggio Beverly 300 scooter. This operation is extremely simple and quick, to be performed only after completing all required scheduled maintenance tasks. First, insert the key and turn on the instrument panel. Then, quickly press and hold the "SET" button located just below the display. After approximately 5 seconds, the warning light depicting a spanner will stop flashing and disappear completely. Next, restart the scooter and check that the procedure has been successful.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the Piaggio Beverly 300 scooter?
How to reset the service on the Piaggio Beverly 300 scooter?
Beverly 300 In this tutorial we can see how to reset the service on the Piaggio Beverly 300 scooter, an extremely simple and quick operation, to be carried out o…
How to Reset the Service on a Piaggio Beverly 300?
How to Reset the Service on a Piaggio Beverly 300?
Beverly 300 This video shows what needs to be done to reset the service on the Beverly 300. The light usually comes on when the mileage for the service is reache…
How to Reset the "Service" Light on a Piaggio Beverly 300
How to Reset the "Service" Light on a Piaggio Beverly 300
Beverly 300 Before you begin, sit on the seat of your Piaggio Beverly 300. Start by pressing and holding the "Mode" button located on the right indicator stalk. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos