Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Piaggio Beverly 300?

Model: Piaggio Beverly 300
Part: Warning light – error code

Video tutorial

This video shows what needs to be done to reset the service on the Beverly 300. The light usually comes on when the mileage for the service is reached. In this case, after the service, you can reset the service light.

The procedure is very simple. It involves holding down the "mode" button on the right light switch for more than ten seconds.

At the same time, you must turn the key to switch on the instrument panel. At this point, the service light will start to flash.

Continue to hold the "mode" button until the service light turns off.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Piaggio Beverly 300 Scooter?
How to Reset the Service Light on a Piaggio Beverly 300 Scooter?
Beverly 300 In this tutorial, you will learn how to reset the service light on a Piaggio Beverly 300 scooter. This operation is extremely simple and quick, to be…
How to Reset the "Service" Light on a Piaggio Beverly 300
How to Reset the "Service" Light on a Piaggio Beverly 300
Beverly 300 Before you begin, sit on the seat of your Piaggio Beverly 300. Start by pressing and holding the "Mode" button located on the right indicator stalk. …
How to reset the service on the Piaggio Beverly 300 scooter?
How to reset the service on the Piaggio Beverly 300 scooter?
Beverly 300 In this tutorial we can see how to reset the service on the Piaggio Beverly 300 scooter, an extremely simple and quick operation, to be carried out o…

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos