Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Battery on a Piaggio Vespa

Model: Piaggio Vespa 125 Lx
Part: Battery

Video tutorial

Replacing the battery on a Vespa is quite simple. To do this, lift the seat using the ignition key and access the compartment underneath.

The battery is located in the small compartment behind the seat. If there is a cover on this compartment, remove it. At this point, you have access to the battery: to disconnect it, simply unscrew the two terminals, remembering to always disconnect the negative first and then the positive.

Once both are free, remove the battery from its housing and insert the new one, then proceed in reverse order (also when connecting the terminals) for reassembly.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Vespa 125 Lx In a few simple steps, we will see the process of disassembling and replacing the battery of the Piaggio Vespa 125 LX. First, we put the scooter on t…
Vespa 125 Lx In this guide, you will learn how to remove and replace the battery of a Piaggio Vespa 125 LX. First, open the seat by turning the key; then remove t…
Vespa 125 Lx In this video, we can see where the battery is located on the Piaggio Vespa Primavera scooter, how to access it, and how to replace it if necessary. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Wheel Bearings on a Derbi Senda

To replace the wheel bearings on a Derbi Senda, completely remove both wheels by loosening the nuts securing the corresponding central axle: this will allow both wheels to be removed from their housing. Then proceed to loosen the bolts securing the discs to the wheels, so they can be completely removed: by sliding off the discs, you will be able to remove the bearings located at the centre of the wheels, using a puller. Then insert the new bearing and reassemble all components.

Watch the video!


by ScegliAuto

More videos