Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear tyre on Piaggio Vespa LX 50

Model: Piaggio Vespa 50 Lx
Part: Tires

Video tutorial

This guide provides step-by-step instructions for removing and replacing the rear tyre on a Piaggio Vespa LX 50, as well as the 125 model. First, remove the exhaust by unscrewing the hex screws with a 6 mm spanner; once removed, take off the split pin from the central nut to unscrew it with a 24 mm spanner, as shown in the video.

Next, remove the wheel and deflate it; lever the sides to remove the tyre; replace it with the new one of the correct type, and reassemble everything, following the video tutorial to the end!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Piaggio Vespa 50 LX
How to Replace the Rear Light Bulb on a Piaggio Vespa 50 LX
Vespa 50 Lx To replace the rear light bulb on a Piaggio Vespa 50 LX, first loosen the two side screws that secure the rear light within its housing, allowing you…
How to Replace the Battery on a Piaggio Vespa 50 LX
How to Replace the Battery on a Piaggio Vespa 50 LX
Vespa 50 Lx In this guide, we will show you how to remove and replace the battery on the Piaggio Vespa 50 LX and Vespa 50 S. First, place your scooter on the cen…
How to Replace the Spark Plug on a Piaggio Vespa LX 50 Scooter
How to Replace the Spark Plug on a Piaggio Vespa LX 50 Scooter
Vespa 50 Lx As shown in this tutorial, replacing the spark plug on a Piaggio Vespa 50 LX scooter is an extremely simple and quick operation. First, ensure the en…

How to Replace the Engine Oil and Gear Oil of the Sym Fiddle 125

It is very simple to perform the routine maintenance service by replacing the engine oil and gear oil of the Sym Fiddle 125 scooter. First, place your scooter on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the filler screw and pour in the new oil, filling up to the maximum level mark. Now perform the same operation for the transmission oil replacement by unscrewing the drain screw located on the casing!

Watch the video!


by ScegliAuto

More videos