Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Belt and Rollers on a Piaggio Beverly 300

Model: Piaggio Beverly 300
Part:

Video tutorial

To replace the belt and rollers on a Piaggio Beverly 300, remove the screws securing the cover that houses the transmission: there are two covers, the upper one contains the air filter and the lower one contains the belt and rollers. Next, loosen the other 8 bolts, including those of the clutch cover.

Once this is removed, extract the clutch by removing the pin with an AEG SD 340 electric screwdriver. Now you can remove the cover that protects the belt and rollers: using the same electric screwdriver, remove the pulleys and then the belt, which will need to be replaced.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Variator and Rollers on the Piaggio Beverly 300
How to Replace the Variator and Rollers on the Piaggio Beverly 300
Beverly 300 Here are the instructions to remove and replace the pulley, variator, and rollers on the Piaggio Beverly 300 scooter, following these simple steps. F…
How to Remove the Fan and Variator on a Piaggio Beverly 300
How to Remove the Fan and Variator on a Piaggio Beverly 300
Beverly 300 In this guide, you will see the main instructions on how to remove and replace the fan, drive belt, and variator on the Piaggio Beverly 300 scooter. …
How to Replace the Exhaust on a Piaggio Beverly 300?
How to Replace the Exhaust on a Piaggio Beverly 300?
Beverly 300 To replace the exhaust on a Piaggio Beverly 300, loosen the screws located at the top and bottom to detach the plastic protective trim. Once the trim…

How to Replace the Clutch on a Kymco Downtown 125?

To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. Once the screws are loosened, remove the cover to access the components underneath: the clutch at the rear can be removed by unscrewing the fixing screws and sliding out all the discs that make it up. At this point, insert the new replacement part, reposition the drive belt, and cover everything with the cover.

Watch the video!


by ScegliAuto

More videos