Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Piaggio
  4. : Liberty Iget

How to Replace the Halogen Bulb in a Piaggio Liberty iGet with a LED?

Model: Piaggio Liberty Iget
Part: Light bulb

Video tutorial

To replace the headlight bulb in a Piaggio Liberty iGet, first remove the visor by loosening the bolts located in the positions indicated in the video. Next, remove the mirrors by lifting the rubber and rotating the mirror itself.

Now, you can unscrew the screw located just below the headlight and remove the clips inside the mirror housing: this will allow you to remove the entire mask. Disconnect the connector and the seal, then rotate the plastic part counterclockwise.

At this point, you can remove the old halogen bulb and replace it with a new LED one.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Hyundai Elantra (2015-2020 / MK 6) Open the sunglasses compartment of the front interior light and use a plastic lever to detach the bulb cover. Then, remove the original halogen bulbs…
Liberty To change the headlight bulb of the Piaggio Liberty, start by removing the windshield, if installed, then unscrew the two side mirrors. Unscrew the t…
Liberty 125 In today's guide video, learn how to remove the front headlight bulb on a Piaggio Liberty 125. First, remove the screws from the top cover of the hea…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Engine from a Suzuki GSX-R 1000?

To replace the engine on a Suzuki GSX-R 1000, loosen the bolts securing the engine to its mounting point in the centre of the frame. To do this, disconnect the intake and exhaust headers and also disconnect the relevant connectors. Then, loosen the bolts securing the cylinder head and cylinder to detach the pistons inside. Access the components near the crankshaft for potential replacement and reassemble after closing the engine block.

Watch the video!


by ScegliAuto

More videos