Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Bulbs with LED in the Cabin

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Interior dome light bulb

Open the sunglasses compartment of the front interior light and use a plastic lever to detach the bulb cover. Then, remove the original halogen bulbs and replace them with LED bulbs (if they do not light up, rotate the installation position) and reattach the cover. Now move to the rear light: detach it using the plastic lever and replace the original halogen bulb with an LED bulb (if it does not light up, rotate the installation position).
Another bulb to replace is the one under the passenger sun visor: detach it with the plastic lever and replace the original halogen bulb with an LED bulb (if it does not light up, rotate the installation position).
You should also replace the one in the rear boot: detach it with the plastic lever and replace the original halogen bulb with an LED bulb (if it does not light up, rotate the installation position).
Lastly, for the number plate lights; it is advisable to remove the carpet cover of the rear boot to facilitate the removal of the bulb holders: detach with the plastic lever and replace the original halogen bulb with an LED bulb (if it does not light up, rotate the installation position).

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Elantra (2010-2015 / MD, UD, MK 5) In today's video, you will learn how to replace the rear headlamp bulbs on the Hyundai Elantra in simple and quick steps. First, open the boot lid an…
Hyundai Elantra (2015-2020 / MK 6) To insert the LED light discs into the bottle holder compartment of the centre tunnel, start by unclipping the side trim panels using a plastic lever…
Hyundai Elantra (2015-2020 / MK 6) This video illustrates how to enhance the interior of your vehicle by adding a series of LEDs (blue in this case). The chosen positions for this appl…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos