Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speedometer Cable on a Piaggio Vespa

Model: Piaggio Vespa 125 Lx
Part: Air filter

Video tutorial

In today's tutorial video, you will learn how to remove and replace the speedometer cable on the Piaggio Vespa LX 125, as well as the 50. First, remove the instrument panel; to do this, take off the luggage compartment shield by unscrewing all the fixing screws, and disconnect the electrical connectors, as shown in the video.

Next, remove the instrument panel and disconnect the speedometer cable; proceed to the wheel to unscrew the fixing screw of the cable to disconnect it. Finally, pull out the cable along with the sheath to replace it, following the video until the end!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Speedometer Cable on a Vespa
How to Replace the Speedometer Cable on a Vespa
Vespa 125 Lx In this video, we see an extremely simple yet effective way to change the speedometer cable on any Piaggio Vespa. The simplest systems are always the…
How to Change the Engine Oil on a Piaggio Vespa 125 LX Scooter
How to Change the Engine Oil on a Piaggio Vespa 125 LX Scooter
Vespa 125 Lx As shown in this tutorial, changing the engine oil on a Piaggio Vespa 125 LX scooter is a very simple and quick operation. First, wait for the engine…
How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
Vespa 125 Lx In this tutorial, you will see how to replace the headlight bulb on a Piaggio Vespa 125 LX scooter, a very simple and quick operation. First, ensure …

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos