Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Mp3 250
    4. : How do you remove the transmission cover of the Piaggio MP3 400?

Model: Piaggio Mp3 250
Part: Checks and maintenance
How do you remove the transmission cover of the Piaggio MP3 400?

In order to disassemble the Piaggio MP3 400 transmission casing, the cap located in the center of the largest pulley must be removed by hand. Before proceeding, it will be necessary to remove the air filter cover: this is fixed by nine screws which, once loosened, will allow the removal of the air filter cover. The upper part of the transmission housing can then be removed by loosening four screws. To remove the lower part, it will be necessary to lock the rear wheel and loosen the center pin of the rear pulley by removing its nut. At this point it will be possible to remove all the screws and also extract the lower part of the casing.


Posted on 24 February 2024 by ScegliAuto

How to remove the seat of the Husqvarna Fc 250

Let's find out in this guide the instructions necessary to remove the driver's seat of the Husqvarna Fc 250, following these simple steps. First of all we put our bike on the stand and we begin to remove the lateral plastic fairing; after which we unscrew the fixing screws that we find on the sides to permanently remove our seat, as shown in the video. At this point we are going to replace the seat with the new one, of the right type, fixing it correctly with its screws; we just have to reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos