Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Piaggio MP3

Model: Piaggio Mp3 250
Part: Air filter

Video tutorial

In this brief and simple guide, you will find the main instructions to remove and replace the air filter along with its housing on the Piaggio MP3 scooter, both 250 and 500 models. First, position your scooter on the centre stand and start by removing the cover of the filter housing by unscrewing all the screws; remove and replace the filter found inside.

At this point, the procedure to dismantle the entire air filter housing is shown, unscrewing the screws located at the bottom; apply the reverse procedure for reassembly!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Remove the Exhaust on a Piaggio MP3 250
How to Remove the Exhaust on a Piaggio MP3 250
Mp3 250 In this video, see how to remove and replace the exhaust on a Piaggio MP3 250cc scooter in simple and quick steps. First, position your scooter on th…
How to Replace the Transmission on a Piaggio MP3 250?
How to Replace the Transmission on a Piaggio MP3 250?
Mp3 250 To replace the transmission on the Piaggio MP3, loosen the bolts securing the protective cover located on the left side of the scooter, just below th…
How to Replace the Battery on the Piaggio MP3 250?
How to Replace the Battery on the Piaggio MP3 250?
Mp3 250 To replace the battery on the Piaggio MP3, open the under-seat compartment by turning the lock with the appropriate key to access the components insi…

How to Replace the Front Headlight Bulbs on a KTM Duke 125?

Replacing the front headlight bulb on the KTM Duke 125, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key is not inserted, then using a Torx screwdriver, remove both the bolts and the rivets securing the front fairing and separate it from the handlebars. Next, remove the large rubber cap located at the back of the headlight, disconnect the power connector, and unlock the metal clip. Once the bulb is extracted, insert the replacement without touching the glass directly with your bare hands, and finally reassemble everything.

Watch the video!


by ScegliAuto

More videos