|
Do it yourself
| |||
| ||||
How to replace the spark plug on a Piaggio Zip?
Model: Piaggio Zip
Video tutorial
To replace the spark plug on the Piaggio Zip, loosen the screws that secure the cover at the base of the underseat compartment, just behind the footrest area. This will allow you to disconnect the coil from the spark plug and remove the spark plug from its housing using the appropriate tool. Once the old spark plug is removed, replace it with a new spare part and connect it to the corresponding coil. After installation, refit the previously removed plastic cover.
Updated on 29 April 2026 by ScegliAuto
Related tutorials
Zip
In order to replace the piston on the Piaggio Zip, you need to loosen the screws that secure the cylinder to the top of the engine block: once the fi…
Zip
To dismantle the engine block of the Piaggio Zip, first extract it from its housing: once removed, you can proceed by loosening the screws that secur…
Zip
It will be possible to disassemble the engine block of the Piaggio Zip by first removing it from the inside of its housing: once it has been extracte…
|
How to Replace the Water Pump on the Malaguti Spidermax GT 500
To replace the water pump on the Malaguti Spidermax GT 500, loosen the screws securing the cover on the right side of the vehicle. Underneath, you will find the stator, which can be removed from its housing. Once the stator is extracted, locate the water pump underneath and remove it from its seat by loosening the securing bolts and disconnecting the hoses. At this point, insert the new water pump and check that everything functions correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
