Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Windscreen on a Piaggio Liberty?

Model: Piaggio Liberty
Part: Windshield

Video tutorial

To install the windscreen on the Piaggio Liberty, insert the large bush, the ring, and then the pin onto the mounting bracket, finally adding the bolt and the corresponding washer. The bracket must then be inserted into the designated hole at the bottom of the front fairing on both sides.

Fit the rubber mounts onto the windscreen and insert the appropriate mounting bushes onto the brackets. Position the windscreen with the rubber mounts aligned with the bushes, allowing you to insert the corresponding bolts and tighten everything, securing the windscreen.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Change the front headlight bulb of the Piaggio Liberty
Change the front headlight bulb of the Piaggio Liberty
Liberty To change the headlight bulb of the Piaggio Liberty, start by removing the windshield, if installed, then unscrew the two side mirrors. Unscrew the t…
How to Install the Centre Stand on the Piaggio Liberty?
How to Install the Centre Stand on the Piaggio Liberty?
Liberty To install the centre stand on the Piaggio Liberty, use a lever to detach the trim panel on the left side of the footwell. Once this panel is removed…
How to Change the Engine Oil of a Piaggio Liberty?
How to Change the Engine Oil of a Piaggio Liberty?
Liberty Hello, today’s goal is to change the engine oil of your Piaggio Liberty. Start by warming up the engine for 5 minutes to thin the oil and allow for q…

How to Dismantle the Engine of a Piaggio Zip?

To dismantle the engine block of the Piaggio Zip, first extract it from its housing: once removed, you can proceed by loosening the screws that secure the side casing and also removing the spark plug from the top of the cylinder. This way, you can unscrew the bolts that secure it to its seat and then loosen the bolts that attach the connecting rod to the piston. By removing the piston itself, you can also dismantle the connecting rod and subsequently remove all other components located inside the engine block.

Watch the video!


by ScegliAuto

More videos