Do it yourself
Frequently asked questions about cars and motorcycles

Model: Piaggio Zip
Part: Light bulb

To replace the indicator bulbs on the Piaggio Zip, remove the panel located directly under the steering wheel to access its internal parts. Unscrew the bolts at the base of the steering wheel, at the bottom of the panel, and inside the glove compartment. Once everything is removed, cut the wires and reconnect them following the steps shown in the video. After installing the new bulbs, refit the internal panel and check that the indicators function correctly.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Zip You can replace the stator on a Piaggio Zip by loosening the screws that secure the exhaust terminal to its housing, located near the rear wheel on t…
Zip You can replace the front brake pads on a Piaggio Zip by unscrewing the screws that secure the front brake caliper to its housing on the back of the …
Zip The procedure for replacing the exhaust installed on the Piaggio Zip involves loosening the screws that secure the terminal to its housing: in this w…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos