Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio X9
Part: Tail light

Before starting, position your Piaggio X9 on the central stand. Begin by opening and lifting the seat to access the under-seat compartment. Next, remove the top box along with its support arm by simply unscrewing the screws and bolts. Once done, unscrew and remove the screws that secure the rear light to the scooter. At this point, disconnect the corresponding electrical connector, then unclip the support hooks. Once this step is complete, you can finally remove the rear light, completing the disassembly.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the rear brake pads of the Piaggio X9
Replacing the rear brake pads of the Piaggio X9
X9 In this guide, we will look at the main steps to remove and replace the brake pads, in this case, the rear ones, of the Piaggio X9 scooter. First, pl…
Reset Service Light on Piaggio X9
Reset Service Light on Piaggio X9
X9 In this video tutorial, you will learn how to reset the maintenance service light for the oil change on a Piaggio X9 scooter, following the simple st…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos