Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to reset the maintenance service light for the oil change on a Piaggio X9 scooter, following the simple steps outlined below. First, turn on the ignition of your scooter and remove the central plastic fairing of the front lights by unscrewing the fixing screws. Press the service reset button located underneath. At this point, turn off the scooter's ignition and start the engine, checking that the service light has reset correctly, as shown in the video!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the rear brake pads of the Piaggio X9
Replacing the rear brake pads of the Piaggio X9
X9 In this guide, we will look at the main steps to remove and replace the brake pads, in this case, the rear ones, of the Piaggio X9 scooter. First, pl…
How to Remove the Rear Light of a Piaggio X9
How to Remove the Rear Light of a Piaggio X9
X9 Before starting, position your Piaggio X9 on the central stand. Begin by opening and lifting the seat to access the under-seat compartment. Next, rem…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos