Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant on the Piaggio Vespa GTS 300

Model: Piaggio Vespa Gts 300
Part: Antifreeze coolant

Video tutorial

In this video, you will see the steps to bleed the cooling system and replace the antifreeze on the Piaggio Vespa GTS 300. First, remove the radiator cap cover by unscrewing the T25 torx screw; then open the cap and unscrew the screws of the water pump casing, allowing the fluid to drain into a container.

At this point, screw the screws back in to secure the casing and pour the new fluid into the radiator, as shown in the video.

Finally, fill it up to the maximum level!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in a Piaggio Vespa GTS 300
How to Replace the Coolant in a Piaggio Vespa GTS 300
Vespa Gts 300 Today's instructions will show you how to drain and refill the engine coolant of the Piaggio Vespa GTS 300. First, place the scooter on its centre st…
How to Replace the Coolant on a Piaggio Vespa GTS 300
How to Replace the Coolant on a Piaggio Vespa GTS 300
Vespa Gts 300 .. Let’s discover the guide on how to replace the coolant on the Piaggio Vespa GTS 300 scooter. First, place your scooter on the centre s.. …
How to Change the Coolant in the Piaggio Vespa GTS 300 HPE
How to Change the Coolant in the Piaggio Vespa GTS 300 HPE
Vespa Gts 300 In this guide, you will learn how to bleed and top up the coolant in the Piaggio Vespa GTS 300 HPE, following the instructions below. First, place yo…

How to Replace the Chain, Sprocket, and Pinion of the Beta RR 125 LC

This guide provides instructions for disassembling and replacing the chain, sprocket, and pinion of the Beta RR 125 LC enduro bike. First, place your bike on a stand and start by removing the metal cover of the pinion by unscrewing the screws. Next, unscrew the screws of the pinion to remove it, using a socket spanner as shown in the video. Now disconnect and remove the drive chain, then remove the wheel to take off the sprocket. Finally, reassemble everything by following the reverse procedure!

Watch the video!


by ScegliAuto

More videos