Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's instructions will show us how to drain and top up the engine coolant on the Piaggio Vespa GTS 300. First, we put the scooter on the center stand and start by disassembling and removing the exhaust silencer, unscrewing the fixing screws; then we unscrew the screws of the water pump casing, letting the fluid drain into a container for about ten minutes, as shown in the video. Now we reassemble the casing and top up with the new antifreeze liquid, filling up to the maximum level mark and topping up if necessary.

Posted on 27 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant on a Piaggio Vespa GTS 300
How to Replace the Coolant on a Piaggio Vespa GTS 300
Vespa Gts 300 Let’s discover the guide on how to replace the coolant on the Piaggio Vespa GTS 300 scooter. First, place your scooter on the centre stand and start …
How to Top Up the Coolant in the Piaggio Vespa GTS 300
How to Top Up the Coolant in the Piaggio Vespa GTS 300
Vespa Gts 300 This guide shows how to check the coolant level in the Piaggio Vespa GTS 300 by following these simple and quick steps. First, place the scooter on i…
How to replace the thermostat and coolant of the Piaggio Vespa GTS 300
How to replace the thermostat and coolant of the Piaggio Vespa GTS 300
Vespa Gts 300 Today's procedure will show us how to disassemble and replace the thermostat and engine coolant of the Piaggio Vespa GTS 300, in simple steps. First,…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos