Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let’s discover the guide on how to replace the coolant on the Piaggio Vespa GTS 300 scooter. First, place your scooter on the centre stand and start by disconnecting the coolant hose found on the water pump casing, allowing the fluid to drain into a container; then unscrew the screws of the casing to check the condition of the coolant pump. At this point, unscrew the filler cap of the reservoir and top up with the new fluid suitable for your radiator, reassembling the plastic cover!

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Coolant in the Piaggio Vespa GTS 300
How to Top Up the Coolant in the Piaggio Vespa GTS 300
Vespa Gts 300 This guide shows how to check the coolant level in the Piaggio Vespa GTS 300 by following these simple and quick steps. First, place the scooter on i…
How to replace the thermostat and coolant of the Piaggio Vespa GTS 300
How to replace the thermostat and coolant of the Piaggio Vespa GTS 300
Vespa Gts 300 Today's procedure will show us how to disassemble and replace the thermostat and engine coolant of the Piaggio Vespa GTS 300, in simple steps. First,…
How to Replace the Coolant in the Piaggio Vespa GTS 300
How to Replace the Coolant in the Piaggio Vespa GTS 300
Vespa Gts 300 Below are the steps to drain and subsequently refill the coolant on the Piaggio Vespa GTS 300 scooter. First, place the scooter on the centre stand a…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos