|
Do it yourself
| |||
| ||||
|
Model: Piaggio Beverly 300
In this brief and simple guide, you will learn how to remove and replace the front and rear brake pads on the Piaggio Beverly 300 scooter. First, place your scooter on the centre stand and begin to unscrew the fixing bolts of the front brake caliper; then remove the brake pads found inside by pushing the piston back. At this point, install the new pads and refit the caliper; perform the same operation for the rear brake pads, following the video tutorial until the end!
Updated on 19 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Beverly 300
You can replace the front brake pads on the Piaggio Beverly 300 by loosening the brake caliper at its corresponding housing: once the caliper is remo…
Beverly 300
Through this very useful video tutorial, we can see the entire operation necessary to adjust the headlight on a Piaggio Beverly 300/350. This operati…
Beverly 300
Obtain a 17 mm spanner to unscrew the two bolts located under the exhaust that secure the caliper to the brake disc. This will allow you to remove th…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
