Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt on a Piaggio NRG

Model: (Various brands) Nrg
Part:

Video tutorial

To replace the belt on a Piaggio NRG, loosen the screws that secure the cover near the rear wheel to remove it. Once detached, you will have access to the underlying components: you need to loosen the central bolt that secures the clutch and the variator to remove these two components.

The belt can then be slid out of its seat to insert the new one. By securing the central bolt of the variator and the clutch, you can then close everything with the cover.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

(Various brands) Nrg This guide explains how to dismantle and replace the variator on the Piaggio Nrg scooter, following the instructions below. First, place the scooter …
(Various brands) Nrg To replace the throttle cable of the Piaggio NRG, you need to unscrew the screws that secure the panels around the under-seat compartment, allowing a…
(Various brands) Nrg To replace the air filter on the Piaggio NRG, loosen the screws securing the cover of the casing located on the left side of the bike, just above the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Engine from a Suzuki GSX-R 1000?

To replace the engine on a Suzuki GSX-R 1000, loosen the bolts securing the engine to its mounting point in the centre of the frame. To do this, disconnect the intake and exhaust headers and also disconnect the relevant connectors. Then, loosen the bolts securing the cylinder head and cylinder to detach the pistons inside. Access the components near the crankshaft for potential replacement and reassemble after closing the engine block.

Watch the video!


by ScegliAuto

More videos