Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video tutorial, you will learn how to disassemble and replace the rear light bulb on the Piaggio Vespa Px 125, as well as the Lml Star. First, put the central stand down and start by removing the rear light; to do this, unscrew the two screws located inside the holes, as shown in the video. At this point, remove the small bulb from the lamp holder, replacing it with the new one; now you can also remove and replace the light unit if necessary by disassembling the metal support and the gasket, following the video until the end!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. front headlight on the Piaggio Vespa PX 125 and Lml Star 125. First, place the bike on its central stand and begin unscrewing the screws securing the.. …
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 and 150. First, place the central stand and start by removing the left side storage box;.. …
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 .. oil of the Piaggio Vespa Px 125, as well as the Lml Star 125 2-stroke. First, place the central stand and start unscrewing the oil drain bolt located.. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos