Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
First, gently lay your Vespa on its side. Unscrew the bolt attached to the bodywork, then those of the exhaust, which you will rotate to remove the wheel. You then need to unscrew the five nuts that secure the wheel to the hub and take it off the hub itself. Before tightening the new wheel onto the rim, it is advisable to inflate it a bit more than normal; we will deflate it to the recommended pressure once it is securely fitted on its rim. At this point, you can reinsert the wheel, secure the nuts, rotate the exhaust back, and reattach its nuts, starting with the top one. Tighten the bracket, and the job is complete.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wheel of the Piaggio Vespa LX 125
How to Remove the Rear Wheel of the Piaggio Vespa LX 125
Vespa 125 Lx This guide shows the steps to remove and replace the rear wheel of the Piaggio Vespa LX 125 scooter, following the instructions below. First, place t…
How to Remove the Front Wheel of a Vespa LX 125
How to Remove the Front Wheel of a Vespa LX 125
Vespa 125 Lx To correctly remove the front wheel of your Vespa LX 125, follow these few simple steps outlined in this guide. Before starting, ensure you have a ba…
How to Replace the Rear Brake Shoes on the Vespa 125 LX?
How to Replace the Rear Brake Shoes on the Vespa 125 LX?
Vespa 125 Lx To replace the rear brake shoes on the Vespa 125 LX, loosen the screws securing the exhaust cover, and once removed, those securing the exhaust itsel…

How to Replace the Air Filter in the KTM Adventure 990

In this tutorial, see how to replace the air filter in the KTM Adventure 990, a very simple and quick operation. First, insert the key into the left ignition switch, then turn it and detach the seat from the base. Next, remove the plastic cover from the tank, locate the filter box, and open it by unscrewing the four fastening screws. At this point, remove the old filter, clean the inside of the housing from any dirt residue, and insert the new part. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos