Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Bv 250
Part: Fuel pump

To replace the fuel pump on the Piaggio BV 250, you need to loosen the screws that secure the cover of the front footwell. Once the screws are removed, unclip the fastening clips of the cover and completely remove it to access the pump. The pump can then be disconnected from its hoses and connectors and pulled out of its housing after loosening the securing screws. After the old pump has been removed, you can replace it with a new spare part and reinstall all previously removed components.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Piaggio BV 250
How to Replace the Battery on a Piaggio BV 250
Bv 250 The battery of the Piaggio BV 250 is located under the seat. To access it, you will need to lift the seat padding and locate the protective cover for…

How to Remove the Front Wheel of a Vespa LX 125

To correctly remove the front wheel of your Vespa LX 125, follow these few simple steps outlined in this guide. Before starting, ensure you have a battery-powered screwdriver available. Next, completely turn off your Vespa LX 125 and preferably leave it in an elevated position. At this point, use your battery-powered screwdriver to remove all the screws on the rim. Once done, gently pull the front wheel towards you to fully detach it.

Watch the video!


by ScegliAuto

More videos