Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Lever on the Piaggio Vespa 125 Primavera?

Model: Piaggio Vespa 125 Primavera
Part:

Video tutorial

To replace the brake lever on the Piaggio Vespa 125 Primavera, you need to loosen the screw that secures the chrome cover at the base of the lever. This will allow you to remove the chrome cover and loosen the bolt that secures the brake lever, completely pulling it out and detaching the brake lever from its housing.

You can then position the new lever and secure it with the previously removed bolt; finally, replace the chrome cover at the base of the brake lever.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
Vespa 125 Primavera Good morning, today’s guide aims to replace the spark plug on your Piaggio Vespa Primavera 125. Start by removing the side panels of the scooter. Nex…
How to Set the Time on the Piaggio Vespa 125 Primavera Scooter?
How to Set the Time on the Piaggio Vespa 125 Primavera Scooter?
Vespa 125 Primavera In this tutorial, we will see how to set the time on the Piaggio Vespa 125 Primavera scooter, an extremely simple and quick operation, to be done aft…
How to Replace the Front Brake Shoes on a Piaggio Vespa 125 Primavera?
How to Replace the Front Brake Shoes on a Piaggio Vespa 125 Primavera?
Vespa 125 Primavera You can replace the front brake shoes on a Piaggio Vespa 125 Primavera by loosening the screws that secure the front wheel of the vehicle to its hous…

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos