Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on a Piaggio X10 350, you need to unscrew the drain plug located at the bottom of the oil tank: once this is removed, you can collect the oil in a suitably positioned container. Next to the drain plug, you will find the oil filter, which should be removed from its housing and replaced with a new one. After the filter has been removed, you can insert the new oil: this will be added through the designated vent at the beginning of the exhaust.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Piaggio X10 350 Scooter?
How to Change the Engine Oil on a Piaggio X10 350 Scooter?
X10 350 .. In this tutorial, you will see how to change the engine oil on a Piaggio X10 350 scooter, a very simple and quick operation. First,.. …
How to Replace the Battery in a Piaggio X10 350
How to Replace the Battery in a Piaggio X10 350
X10 350 To replace the battery in a Piaggio X10 350, lift the seat of the scooter by inserting the key into the side lock. Once the seat is lifted, locate th…
Resetting the Service Light on the Piaggio X10
Resetting the Service Light on the Piaggio X10
X10 350 In this video tutorial, you will learn how to reset the service light for the regular maintenance oil change on the Piaggio X10 scooter. First, place…

How to Change the Engine Oil on a Triumph Tiger 900?

To change the engine oil on the Triumph Tiger 900, follow these steps. First, ensure the engine is warm but not too hot. Lift the motorcycle on a centre or side stand to make it stable. Locate the oil drain plug on the engine casing, usually positioned on the lower side of the engine. Place an oil collection container under the drain plug and unscrew the plug to allow the used oil to drain out. Once the oil has completely drained, remove and replace the oil filter. Be sure to lubricate the sealing ring of the new filter before installing it. Reinstall the oil drain plug and ensure it is tightly secured. Next, locate the oil filler cap on the engine and remove it. Fill the engine with new engine oil, using the oil recommended in the owner's manual. Check the oil level using the dipstick and add oil if necessary to reach the correct level. Finally, screw the oil filler cap back on, start the engine, and check for any oil leaks. Recheck the oil level and add oil if necessary. Once the procedure is complete, dispose of the used oil properly at an authorised recycling centre.

Watch the video!


by ScegliAuto

More videos