Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The information provided in this guide will show us how to disassemble and replace the rear wheel or tire of the Ducati Multistrada 1260 enduro motorcycle. First, we place the motorcycle on the center stand and start unscrewing the central nut of the rear wheel, using a socket wrench with an extension; we then disconnect the wheel from the drive chain to remove it, as shown in the video. At this point, if necessary, we replace the rear tire or brake disc, then reassemble the wheel; we adjust the chain tension properly.

Posted on 20 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wheel on the Ducati Multistrada 1260 Enduro
How to Remove the Front Wheel on the Ducati Multistrada 1260 Enduro
Multistrada 1260 In today's video, you will see the steps to remove and replace the front wheel on the Ducati Multistrada 1260 Enduro. First, position the bike on a s…
How to Perform a Service on a Ducati Multistrada 1260 Enduro
How to Perform a Service on a Ducati Multistrada 1260 Enduro
Multistrada 1260 Here is the guide on how to perform routine maintenance by replacing the engine oil and oil filter on a Ducati Multistrada 1260 Enduro. First, remove…
How to replace the rear brake pads on the Ducati Multistrada 1260?
How to replace the rear brake pads on the Ducati Multistrada 1260?
Multistrada 1260 In this tutorial, you can see how to replace the rear brake pads on the Ducati Multistrada 1260, a very simple and quick operation. First, lift the r…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos