Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads on the Ducati Multistrada 1260?

Model: Ducati Multistrada 1260
Part: Brake pads

Video tutorial

In this tutorial, you can see how to replace the rear brake pads on the Ducati Multistrada 1260, a very simple and quick operation. First, lift the rear wheel on a stand, then remove the exhaust end can by unhooking the collector spring and unscrewing the upper bracket bolt.

Next, remove the wheel by unscrewing the relevant bolt with the appropriate spanner, unclip the two indicated clips, and extract the pin from the caliper. At this point, simply remove the old pads, position the replacements, and reassemble everything following the reverse procedure.


Posted on 30 July 2026 by ScegliAuto


Related tutorials

How to Replace Front Brake Pads on Ducati Multistrada 1260
How to Replace Front Brake Pads on Ducati Multistrada 1260
Multistrada 1260 In this tutorial video, you will see the instructions to remove and replace the front brake pads on the Ducati Multistrada 1260, following these simp…
Replace the air filter of the Ducati Multistrada 1260
Replace the air filter of the Ducati Multistrada 1260
Multistrada 1260 Let's briefly discover the instructions that will allow you to remove and replace the engine air filter of the Ducati Multistrada 1260 in simple and …
How to replace the clutch in the Ducati Multistrada 1260?
How to replace the clutch in the Ducati Multistrada 1260?
Multistrada 1260 To replace the clutch in the Ducati Multistrada 1260, you need to loosen the screws that secure the circular cover on the right side of the bike: aft…

How to Replace the Clutch on the KTM XCF 450?

To replace the clutch on the KTM XCF 450, loosen the screws securing the corresponding cover located on the right side of the bike. Once the cover screws are loosened, you can remove it to access the underlying clutch. By unscrewing the corresponding bolts, you can extract all the discs that make up the clutch, allowing you to insert the new replacement parts. After inserting them, secure them with the corresponding screws and cover everything back up with the cover.

Watch the video!


by ScegliAuto

More videos