Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video, you will see the steps to remove and replace the front wheel on the Ducati Multistrada 1260 Enduro. First, position the bike on a stand and start by unscrewing the screws of the front mudguard, located on both sides; then, unscrew the fork bolt using an Allen key. At this point, remove the central nut of the axle using a socket spanner; next, remove the front brake calipers to take off the wheel. Follow the video to the end for the reassembly of the front wheel!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear wheel of the Ducati Multistrada 1260 Enduro
How to replace the rear wheel of the Ducati Multistrada 1260 Enduro
Multistrada 1260 The information provided in this guide will show us how to disassemble and replace the rear wheel or tire of the Ducati Multistrada 1260 enduro motor…
How to Perform a Service on a Ducati Multistrada 1260 Enduro
How to Perform a Service on a Ducati Multistrada 1260 Enduro
Multistrada 1260 Here is the guide on how to perform routine maintenance by replacing the engine oil and oil filter on a Ducati Multistrada 1260 Enduro. First, remove…
How to Replace Front Brake Pads on Ducati Multistrada 1260
How to Replace Front Brake Pads on Ducati Multistrada 1260
Multistrada 1260 In this tutorial video, you will see the instructions to remove and replace the front brake pads on the Ducati Multistrada 1260, following these simp…

How to Replace the Spark Plug in a Yamaha FZ 150

In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engine is sufficiently cool and ensure the key is not inserted. Then, move to the right side of the motorcycle and locate the spark plug. Disconnect the power connector, grasp the spark plug with a 16mm socket, and carefully unscrew it. At this point, insert the replacement, tighten it without applying excessive force, and reconnect the connector. Finally, start the engine to verify that the new spark plug functions correctly.

Watch the video!


by ScegliAuto

More videos