Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Harley Davidson Road Glide, follow these steps. First, make sure the engine is warm but not too hot. Lift the bike on a central or side stand to ensure a stable position. Locate the oil drain plug and the oil fill cap on the engine. Remove the fill cap to allow the old oil to drain more easily. Then, place a collection container under the oil drain plug. Remove the oil drain plug and let the old oil drain completely. Once the draining is complete, replace the oil drain plug and tighten it securely. Then, fill the engine with new oil through the fill cap to the recommended level. Make sure to use a high-quality motor oil recommended by the manufacturer. Check the oil level using the dipstick and add oil if necessary. Finally, start the engine and let it run for a few minutes to allow the oil to distribute properly. Check the oil level again and add if necessary. Make sure to properly dispose of the used oil at an authorized collection center.

Posted on 21 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Harley-Davidson Road Glide?
How to replace the motor oil in the Harley-Davidson Road Glide?
Road Glide In this tutorial we can see how to replace the engine oil in the Harley-Davidson Road Glide, a very simple and quick operation. First of all, we wait…
How to replace the motor oil in the Harley-Davidson Road Glide Special?
How to replace the motor oil in the Harley-Davidson Road Glide Special?
Road Glide In this tutorial we can see how to replace the motor oil in the Harley-Davidson Road Glide Special, an extremely simple and quick operation. First of…
How to Change the Engine Oil on a Harley Davidson Road Glide?
How to Change the Engine Oil on a Harley Davidson Road Glide?
Road Glide To replace the engine oil on a Harley Davidson Road Glide, you need to completely remove the protective panel located at the central lower part of th…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos