Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to change the engine oil on a Piaggio X10 350 scooter, a very simple and quick operation. First, ensure the engine is cool enough, then position a container underneath it, locate the drain bolt, and undo it using an Allen key. Next, remove the dipstick, allow all the oil in the system to drain out, and proceed to undo the old filter. At this point, simply reassemble everything and add the required amount of oil through the designated hole.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Piaggio X10 350?
How to Change the Engine Oil on a Piaggio X10 350?
X10 350 To change the engine oil on a Piaggio X10 350, you need to unscrew the drain plug located at the bottom of the oil tank: once this is removed, you ca…
How to reset the service on the Piaggio X10 350 scooter?
How to reset the service on the Piaggio X10 350 scooter?
X10 350 In this tutorial we can see how to reset the service on the Piaggio X10 350 scooter, an extremely simple and fast operation, to be carried out only o…
Resetting the Service Light on the Piaggio X10
Resetting the Service Light on the Piaggio X10
X10 350 In this video tutorial, you will learn how to reset the service light for the regular maintenance oil change on the Piaggio X10 scooter. First, place…

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos