Do it yourself
Frequently asked questions about cars and motorcycles
To replace the headlight bulb on the Piaggio X10, loosen the screws securing the front fairing: these are located immediately above the headlight and just below the steering controls. After detaching the front trim, you will be able to access the screws securing the windscreen, which will also need to be removed. This will allow access to the connector behind the headlight, which must be disconnected to extract the bulb; the new bulb should then be connected to the connector and inserted back into the headlight.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

X10 125 To replace the air filter on the Piaggio X10 125, you need to loosen the screws that secure the cover located near the rear wheel, above the transmis…
X10 125 In order to set the clock of the Piaggio X10 125, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot:…
X10 125 How to replace the engine air filter on a Piaggio X10 125? Follow this guide to proceed with the replacement. Position the scooter on a central stand…

How to Change the Engine Oil in a Royal Enfield 500?

In this tutorial, you will learn how to change the engine oil in a Royal Enfield 500, an extremely simple and quick operation to be performed every 12 months. First, ensure that the engine is cold, then place a container underneath and, using a 10mm socket, unscrew the two bolts related to the drain holes. Once the oil has drained from the system, open the filter cap using the same socket, insert the replacement, and reassemble everything in reverse order. Finally, pour in new 15W50 oil through the upper hole.

Watch the video!


by ScegliAuto

More videos