Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Clock on the Piaggio X10 125?

Model: Piaggio X10 125
Part: Clock

Video tutorial

To set the clock on the Piaggio X10 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the button located at the bottom right of the central screen until the hours start flashing.

You can change the hours with single presses of the button, and by pressing it again for a few seconds, the minutes will start flashing: these can now be adjusted in the same way as the hours.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

X10 125 To replace the air filter on the Piaggio X10 125, you need to loosen the screws that secure the cover located near the rear wheel, above the transmis…
X10 125 How to replace the engine air filter on a Piaggio X10 125? Follow this guide to proceed with the replacement. Position the scooter on a central stand…
X10 125 To replace the headlight bulb on the Piaggio X10, loosen the screws securing the front fairing: these are located immediately above the headlight and…

How to Reset the Service Light on a KTM Super Duke 1290 R

This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you have completed the required scheduled maintenance. Start by inserting the key and turning on the instrument panel, then navigate to the general menu, move the selector to "Options" and press the two indicated buttons. Adjust the two intervals using the directional arrows, return to the main screen, and restart the panel to verify that the reset was successful.

Watch the video!


by ScegliAuto

More videos