Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief and simple guide, see how to remove and replace the starter motor of the Piaggio NRG 50 2-stroke scooter. First, unscrew and remove the screws from the centre stand, then lift the scooter with a jack; you can then access the starter motor as shown in the video. Next, unscrew the starter motor screws using a socket spanner; disconnect the power connector to remove it and replace it with the new one. Finally, reassemble everything by applying the reverse procedure!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the starter motor located on the Piaggio NRG scooter?
Where is the starter motor located on the Piaggio NRG scooter?
(Various brands) Nrg In this video, you can see where the starter motor is located on the Piaggio NRG scooter and how to proceed if you need to replace it. As shown, it i…
How to replace the air filter on the Piaggio NRG?
How to replace the air filter on the Piaggio NRG?
(Various brands) Nrg To replace the air filter on the Piaggio NRG, loosen the screws securing the cover of the casing located directly above the transmission casing, near…
How to Remove the Air Filter from a Piaggio Nrg 50
How to Remove the Air Filter from a Piaggio Nrg 50
(Various brands) Nrg In this short and simple video, you will see how to remove and replace the air filter of the Piaggio Nrg 50 scooter, as well as the Zip and Phantom F…

Replacing the dipped beam bulb on a Sym Mio 50i

In this tutorial video, we will see the entire operation necessary to replace the dipped beam bulb on a Sym Mio 50i. Start by removing the screws from the front shield along the edges of the scooter, behind the wheel arch and behind the front logo, then remove it, taking care to disconnect the wiring of the bulbs. Once done, remove the rubber cap protecting the dipped beam bulb and unscrew the retaining screw, then lift the tab holding the bulb in place and finally remove the bulb itself. Finally, install a new dipped beam bulb by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos