Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, you can see where the starter motor is located on the Piaggio NRG scooter and how to proceed if you need to replace it. As shown, it is located in the lower area of the engine and is connected to the crown inside the transmission casing. To access it, first remove the casing by unscrewing all the screws along the perimeter. Once done, lay the scooter on the ground and remove the stand by taking out the respective bolts. At this point, you will have access to the starter motor and can proceed with its replacement.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor from a Piaggio NRG 50
Removing the Starter Motor from a Piaggio NRG 50
(Various brands) Nrg In this brief and simple guide, see how to remove and replace the starter motor of the Piaggio NRG 50 2-stroke scooter. First, unscrew and remove the…
How to replace the spark plug on a Piaggio Nrg
How to replace the spark plug on a Piaggio Nrg
(Various brands) Nrg In this video tutorial, you will see the instructions that will allow you to remove and replace the spark plug of the engine on the Piaggio Nrg 50 sc…
How to Replace the Variator on the Piaggio Nrg
(Various brands) Nrg This guide explains how to dismantle and replace the variator on the Piaggio Nrg scooter, following the instructions below. First, place the scooter …

Replacing the dipped beam bulb on a Sym Mio 50i

In this tutorial video, we will see the entire operation necessary to replace the dipped beam bulb on a Sym Mio 50i. Start by removing the screws from the front shield along the edges of the scooter, behind the wheel arch and behind the front logo, then remove it, taking care to disconnect the wiring of the bulbs. Once done, remove the rubber cap protecting the dipped beam bulb and unscrew the retaining screw, then lift the tab holding the bulb in place and finally remove the bulb itself. Finally, install a new dipped beam bulb by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos