Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Engine Oil and Oil Filter on a Piaggio Vespa LX 125

Model: Piaggio Vespa 125 Lx
Part: Engine oil

Video tutorial

This video will show you how to carry out routine maintenance by replacing the engine oil and oil filter on a Piaggio Vespa LX 125. First, place your scooter on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter found on the cap, replacing it with a new one if damaged.

Now unscrew the filler cap and pour in the appropriate oil for your engine, as indicated in the user and maintenance manual.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to perform a service on the Piaggio Vespa 50 - 125 LX
Vespa 125 Lx This guide explains how to carry out the routine maintenance service for the oil change on the Piaggio Vespa 50 and 125 LX in simple steps. First, po…
How to change the engine oil of a Piaggio Vespa 125 LX?
How to change the engine oil of a Piaggio Vespa 125 LX?
Vespa 125 Lx To change the engine oil of the Piaggio Vespa LX 125, you need to unscrew the drain plug of the oil sump, which is located at the central lower part …
How to replace the engine oil in the Piaggio Vespa 125 LX scooter?
How to replace the engine oil in the Piaggio Vespa 125 LX scooter?
Vespa 125 Lx In this tutorial, we can see how to replace the motor oil in the Piaggio Vespa 125 LX scooter, an extremely simple and quick operation. First of all,…

How to Replace the Rear Brake Pads on a Benelli TRK 502X?

To replace the rear brake pads on a Benelli TRK 502X, loosen the screws that secure the corresponding caliper so that it can be detached from the brake disc: once the caliper is removed from its disc, you can proceed to detach it and remove the pin that secures the pads inside the caliper. At this point, you can remove the old pads from their seat to insert the new ones: these must be secured properly by positioning the caliper and checking that the brake is functioning.

Watch the video!


by ScegliAuto

More videos