Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of a Piaggio Ciao

Model: Piaggio Ciao
Part: Engine

Video tutorial

As shown in the video, the first step to dismantle the engine on your Piaggio Ciao scooter is to remove the covers where the pedals and exhaust are located. Remove the spark plug cap and the decompressor, then use a 5 pence coin to unscrew the screw of the engine cover.

Remove the bracket and disconnect the two electrical wires. Close the fuel tap. Loosen the three screws holding the engine as shown in the video and gently pull the engine block forward using a lever or your hands.

Dismantle the air filter and throttle valve. Remove the carburettor and coil, and unscrew the spark plug counterclockwise.

Unscrew the three screws you loosened earlier, and you will have dismantled your engine.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of a Piaggio Ciao?
How to Dismantle the Engine of a Piaggio Ciao?
Ciao To dismantle the engine of the Piaggio Ciao, loosen the screws that secure it to its housing in the centre of the frame so that it can be freed: at t…
How to Dismantle and Clean the Carburettor of the Piaggio Ciao
How to Dismantle and Clean the Carburettor of the Piaggio Ciao
Ciao This guide briefly outlines the instructions for dismantling and cleaning the carburettor of the Piaggio Ciao, as well as the Si and Garelli. First, …
How to Dismantle the Fork on the Piaggio Si - Ciao - Bravo
How to Dismantle the Fork on the Piaggio Si - Ciao - Bravo
Ciao In this tutorial, you will learn how to dismantle the front fork on the Piaggio Ciao 50 cc, as well as on the Si, Bravo, and Garelli. First, place th…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos