Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the spark plug on the Piaggio Fly 125, loosen the screws that secure the plastic panel at the base of the footwell and those that secure the underseat compartment, removing both panels. Accessing from the footwell, you can disconnect the side connector, under which the spark plug to be removed is connected. Accessing from the underseat compartment, you can also remove any additional obstructing parts so that the spark plug can be extracted from its housing. After removal, insert a new one and reassemble all the removed components.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Piaggio Fly 125
How to Change the Engine Oil on a Piaggio Fly 125
Fly 125 In today's video, you will see how to perform the routine maintenance service for changing the oil on a Piaggio Fly 125, as well as on the Vespa LX a…
How to Replace the Clutch on the Piaggio Fly 125
How to Replace the Clutch on the Piaggio Fly 125
Fly 125 Below are the instructions that will allow you to dismantle and replace the clutch on the Piaggio Fly 125 scooter. First, place the scooter on the ce…
How to Change the Gear Oil of the Piaggio Fly 125
How to Change the Gear Oil of the Piaggio Fly 125
Fly 125 Today, we will see in this video tutorial how to change the transmission oil of the Piaggio Fly 125 scooter. First, place your scooter on the centre …

How to Change the Engine Oil on a Yamaha TW 200?

To change the engine oil on a Yamaha TW 200, follow these steps. Ensure the engine is warm. Position the bike on a flat surface. Remove the oil drain plug on the underside of the engine. Place a container under the plug to collect the used oil. Allow the used oil to drain completely. Once drained, reinsert the drain plug and tighten it securely. Remove the oil filler cap from the top of the engine. Using a funnel, slowly pour new oil into the oil reservoir, checking the recommended quantity in the owner's manual. After adding the oil, reinsert and tighten the filler cap securely. Start the engine and let it run for a few minutes. Check the oil level and add if necessary. Finally, clean up any spills and dispose of the used oil properly.

Watch the video!


by ScegliAuto

More videos