Do it yourself
Frequently asked questions about cars and motorcycles

Model: Piaggio Vespa 50 Lx
Part:

To replace the drive belt on a Piaggio Vespa 50 LX, loosen the bolts securing the side panels on the left side of the scooter, near the rear wheel. Once this panel is removed, you can access the underlying cover, which must be opened by unscrewing the bolts securing the cover. After the cover is removed, unscrew the bolts securing the variator and clutch centrally so that the belt can be removed. Then, insert a new belt, reassembling all previously removed components.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Vespa 50 Lx In this video tutorial, you will see how to remove and replace the battery on the Piaggio Vespa LX 50, as well as the LX 125. First, use a screwdrive…
Vespa 50 Lx This guide will show you how to change the transmission oil on a Piaggio Vespa LX 50 scooter. First, place your scooter on the centre stand and begin…
Vespa 50 Lx Today, in this brief and simple guide, we will see how to remove and replace the spark plug of the engine on the Piaggio Vespa 50 LX scooter. First, …

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos