Do it yourself
Frequently asked questions about cars and motorcycles
This guide shows how to replace the battery on the Piaggio Vespa PK 50. After opening the access flap to the battery compartment, remove it and take off the battery protection panel. Detach the battery retaining strap and unscrew the two bolts securing the electrical connectors on the battery terminals. Remove the old battery and install a model compatible with the motorcycle's technical specifications. Refit the battery compartment cover and the flap, then check the correct functioning of the electrical system.

Updated on 20 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Vespa 50 S In order to replace the air filter of the Piaggio Vespa 50 S, you need to loosen the screws that secure the air filter cover: the filter will be loca…
Vespa 50 S Follow the main steps to install and adjust the mirrors on the handlebars of the Piaggio Vespa 50 S scooter, as well as on the Vespa GTS 300. First, …
Vespa 50 S To replace the air filter on the Piaggio Vespa 50 S, you need to loosen the screws that secure the cover panel of the casing located near the rear wh…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos