|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa 50 S
Follow the main steps to install and adjust the mirrors on the handlebars of the Piaggio Vespa 50 S scooter, as well as on the Vespa GTS 300. First, place the scooter on its centre stand and start by unscrewing the fixing screws of the handlebar risers to remove them. Then, install the mirrors and refit the side risers to secure them, as shown in the video. At this point, adjust the mirrors on the handlebars by following the video tutorial to the end!
Updated on 19 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa 50 S
This guide shows how to replace the battery on the Piaggio Vespa PK 50. After opening the access flap to the battery compartment, remove it and take …
Vespa 50 S
To replace the air filter on the Piaggio Vespa 50 S, you need to loosen the screws that secure the cover panel of the casing located near the rear wh…
Vespa 50 S
In order to replace the air filter of the Piaggio Vespa 50 S, you need to loosen the screws that secure the air filter cover: the filter will be loca…
|
How to Replace the Air Filter on a Honda CB500X?
Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.241
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |