Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. : Vespa 50 S

Piaggio Vespa 50 S - Video guides

Piaggio Vespa 50 S
How to replace the air filter on the Piaggio Vespa 50 S?
To replace the air filter on the Piaggio Vespa 50 S, you need to loosen the screws that secure the cover panel of the casing located near the rear wheel, on …Read all…
Posted on 30 April 2026 by ScegliAuto
Piaggio Vespa 50 S
How do you replace the air filter of the Piaggio Vespa 50 S?
In order to replace the air filter of the Piaggio Vespa 50 S, you need to loosen the screws that secure the air filter cover: the filter will be located above …Read all…
Posted on 4 March 2025 by ScegliAuto
Piaggio Vespa 50 S
How to replace the battery of the watch on Vespa S
Start by removing the mirrors by unscrewing them by hand. Then, remove the front cover with the headlight and disconnect the connectors. By unscrewing the …Read all…
Posted on 27 January 2025 by ScegliAuto
Piaggio Vespa 50 S
How to Install and Adjust the Mirrors on a Piaggio Vespa
Follow the main steps to install and adjust the mirrors on the handlebars of the Piaggio Vespa 50 S scooter, as well as on the Vespa GTS 300. First, place the …Read all…
Posted on 19 September 2026 by ScegliAuto
Piaggio Vespa 50 S
How to Replace the Battery on the Piaggio Vespa PK 50
This guide shows how to replace the battery on the Piaggio Vespa PK 50. After opening the access flap to the battery compartment, remove it and take off the …Read all…
Posted on 30 August 2026 by ScegliAuto
Piaggio Vespa 50 S
How to Replace the Steering Bearing on the Piaggio Vespa 50 S?
To replace the steering bearing on the Piaggio Vespa 50 S, loosen the screw that secures the front headlight so that it can be removed. Next, unscrew the bolts …Read all…
Posted on 30 August 2026 by ScegliAuto
Piaggio Vespa 50 S
How to Remove the Number Plate and Number Plate Holder from the Piaggio Vespa 50 S 4T
In this brief guide, you will learn how to remove and replace the number plate and number plate holder of the Piaggio Vespa 50 S 4-stroke in simple and quick …Read all…
Posted on 30 July 2026 by ScegliAuto

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos