Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Number Plate and Number Plate Holder from the Piaggio Vespa 50 S 4T

Model: Piaggio Vespa 50 S
Part:

This video is currently unavailable

In this brief guide, you will learn how to remove and replace the number plate and number plate holder of the Piaggio Vespa 50 S 4-stroke in simple and quick steps. First, place the central stand on your scooter and start by unscrewing the side screws of the tail, removing the plastic frame; then remove the entire number plate holder along with the number plate by unscrewing the screws with a Torx screwdriver, as shown in the video.

At this point, remove the number plate from the holder by drilling out the rivets; finally, reassemble everything, following the video to the end!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Install and Adjust the Mirrors on a Piaggio Vespa
How to Install and Adjust the Mirrors on a Piaggio Vespa
Vespa 50 S Follow the main steps to install and adjust the mirrors on the handlebars of the Piaggio Vespa 50 S scooter, as well as on the Vespa GTS 300. First, …
How to Replace the Battery on the Piaggio Vespa PK 50
Vespa 50 S This guide shows how to replace the battery on the Piaggio Vespa PK 50. After opening the access flap to the battery compartment, remove it and take …
How do you replace the air filter of the Piaggio Vespa 50 S?
How do you replace the air filter of the Piaggio Vespa 50 S?
Vespa 50 S In order to replace the air filter of the Piaggio Vespa 50 S, you need to loosen the screws that secure the air filter cover: the filter will be loca…

How to Replace the Stator on the Triumph Daytona 675?

To replace the stator on the Triumph Daytona 675, loosen the screws that secure the cover located on the left side of the bike: once these screws have been removed, detach the cover and access the underlying stator. The stator can be removed from its housing by unscrewing the central screws that secure it: this way, you can insert a new stator into its housing, re-inserting the side starter motor. Once these components have been reinserted, close everything with the cover.

Watch the video!


by ScegliAuto

More videos