Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Vespa Gts 125
    4. : Replacement of the rear brake pads of the Piaggio Vespa GTS 125

Model: Piaggio Vespa Gts 125
Part: Brake pads
Replacement of the rear brake pads of the Piaggio Vespa GTS 125

Today we will see, in this video tutorial, how to disassemble and replace the rear brake pads of the Piaggio Vespa GTS 125 scooter, but also of the GTS 300. First of all, put the center stand on our scooter and start disassembling and removing the silencer from the muffler by unscrewing the fixing screws; we then unscrew the wheel nuts to remove it. At this point we remove the central pin of the brake caliper, so that we can remove the old pads; let's clean the caliper and press inside on the piston to retract it. We install the new brake pads and put everything back together!


Posted on 18 November 2022 by ScegliAuto

How do you change the engine oil of the BMW R 1200 GS?

The replacement of the engine oil of the BMW R 1200 GS is carried out by loosening the bolts that secure the skid plate positioned in the lower part of the bike. Once this plate has been removed, it will be possible to unscrew the drain plug below, so that the used oil can be collected inside a suitably positioned container. Next to the drain plug you will find the oil filter, which in turn must be extracted and replaced with a new one. After the replacement, it will be possible to top up from the special vent on the crankcase to the left of the bike.

Watch the video!


by ScegliAuto

More videos