Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Ciao
Part: Tires

In this brief and simple guide, you will find instructions to remove and replace the tyre and inner tube of the Piaggio Ciao, as well as the Si and Garelli models. First, put the central stand down and begin to remove the rear wheel; to do this, unscrew the central nut and disconnect the brake cable. At this point, release the air from the inner tube and lever the sides of the tyre to remove it, also taking out the old inner tube. Then, insert the new one, aligning the valve hole, and reassemble the tyre, following the video tutorial to the end!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Inner Tube and Tyre on the Piaggio Ciao - Si - Garelli
How to Install the Inner Tube and Tyre on the Piaggio Ciao - Si - Garelli
Ciao .. rim of the Piaggio Ciao, as well as on the Si and Garelli. First, remove the wheel and take off the old tyre; ensure the rim is free of rust (if rust.. …
How to Change the Inner Tube on the Piaggio Ciao - SI - Bravo - Garelli
How to Change the Inner Tube on the Piaggio Ciao - SI - Bravo - Garelli
Ciao .. the Piaggio Ciao, as well as the SI, Bravo, and Garelli. First, place the central stand and start by removing the rear wheel; to do this, remove the.. …
Replacing the Belt on the Piaggio Ciao, Si, Garelli
Replacing the Belt on the Piaggio Ciao, Si, Garelli
Ciao .. belt on the Piaggio Ciao, as well as the Si and Garelli. First, put the central stand down and start by removing the left side cover to access the transmission;.. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos