Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Inner Tube and Tyre on the Piaggio Ciao - Si - Garelli

Model: Piaggio Ciao
Part: Tires

Video tutorial

Follow these step-by-step instructions to install the inner tube and tyre onto the rim of the Piaggio Ciao, as well as on the Si and Garelli. First, remove the wheel and take off the old tyre; ensure the rim is free of rust (if rust is present, remove it and proceed with painting).

At this point, install one side of the tyre first, then insert the inner tube; place the valve through the hole and fully mount the tyre, then fit the front or rear wheel back onto your motorcycle!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Replace the Tyre and Inner Tube of the Piaggio Ciao - Garelli
How to Replace the Tyre and Inner Tube of the Piaggio Ciao - Garelli
Ciao .. inner tube of the Piaggio Ciao, as well as the Si and Garelli models. First, put the central stand down and begin to remove the rear wheel; to do this,.. …
How to install the tire and inner tube on the rim of the Piaggio Ciao.
How to install the tire and inner tube on the rim of the Piaggio Ciao.
Ciao These brief and simple steps will guide us on how to install the tire and inner tube on the rim of the Piaggio Ciao. First, we insert half of the tir…
How to Change the Inner Tube on the Piaggio Ciao - SI - Bravo - Garelli
How to Change the Inner Tube on the Piaggio Ciao - SI - Bravo - Garelli
Ciao .. the Piaggio Ciao, as well as the SI, Bravo, and Garelli. First, place the central stand and start by removing the rear wheel; to do this, remove the.. …

How to Change the Headlight Bulb on the Aprilia Scarabeo 50

In this short and simple guide, you will learn how to disassemble and replace the headlight bulb on the Aprilia Scarabeo 50 scooter, following the instructions below. First, place the scooter on the centre stand and begin by removing the plastic cover located in front of the instrument panel; to do this, unscrew the securing screws found underneath, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove it, replacing it with a new one (with the same fitting); then reassemble the bulb and the optical unit!

Watch the video!


by ScegliAuto

More videos